Ex-Monitor - crew health console
================================

Assistant: No AI

This copy uses the written NASA action cards and the rules engine only.
Nothing is downloaded and no graphics card is needed.

How to start
------------
1. Install Node.js 18 or newer from https://nodejs.org if it is not installed.
2. Windows: double-click "Start Ex-Monitor.cmd".
   macOS: double-click "Start Ex-Monitor.command".
   Linux: run ./start-ex-monitor.sh in a terminal.
3. A browser opens at http://localhost:8080.

Using a phone as the body sensor
--------------------------------
Open the address the launcher prints for this network, followed by /sensors.html,
on the phone. For example: http://192.168.1.20:8080/sensors.html
Then open Settings in the console and scan the code from the sensor page.
Both devices must be on the same Wi-Fi or hotspot.

Alerts
------
Other consoles on the same network show a full-screen alert until each one
acknowledges it. The sender sees a small sent panel and can cancel the alert
for everyone.

Notes
-----
- System notifications and installing as an app need localhost or HTTPS.
  The full-screen alert always works while the console is open.
- The sensor page sends pretend readings. It is not a medical device.
- This is a training simulation and does not replace real medical care.

Build 1.0.0 - 2026-11-14T14:54:23.557Z
